AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Mutoh Valuejet3/25/2021
Operation manual 2.4.2 Setup Menu Each setup concerning printing can be operated by using operation panel.However, if the cause of failure is uncertain, decide the action after due mutual consultation.
Mutoh Valuejet Full Color InkPurpose and Target Readers This manual explains preparations needed before maintaining and checking operations for MUTOH Full Color Ink Jet Printer (VJ-1304).This manual is prepared for the maintenance personnel of this printer.Manual Notation The following symbols are used in this manual for easier understanding of the information. Symbol Meaning Must be followed carefully to avoid death or serious bodily injury WARNING Must be observed to avoid slight or moderate bodily injury or damage to. WARNING Make sure to follow all instructions and warnings on this manual when installing, operating, or maintaining the equipment. Doing so may result in the printer tipping or falling over and causing injury. When foreign substances or liquids such as water entered the printer, do not use the printer as it is. Never lube the printer mechanism with lube other than that designated by MUTOH. Head cleaning may not be operated correctly because of the grease attached. Make sure to wipe the print head with a dry poly-knit wiper. Be sure to operate the following before attaching option units. Warning labels are attached to areas where care should be taken. Read and understand the positions and contents thoroughly before maintenance operation. The operation labels are attached on the product to provide the brief instructions for the particularly important operations. Table 1-3 List of Operation Labels Operation label type (Roll media setting) Operation manual Setting Roll Media AP-74109 Rev 1.1 1-12. NOTE For the directions described in this document, refer to the following figure. Operation panel This panel is used to set operational conditions, the status of the printer, and other functions. There are heaters (platen heater) inside to dry ink. Rear Section Table 2-2 Part Names and Functions of Rear Section. The names and functions of the operation keys and status lamps are explained below. Name Normal Setup menu display Menu key Changes the LCD monitor display to Changes the setup menu display setup menu status. Turns the printer on and off. LCD Monitor and Status Lamps Name Color Status Function Power lamp Green On The printer is switched on. Each setup concerning printing can be operated by using operation panel.
0 Comments
Read More
Leave a Reply. |